Navara D40, Pathfinder R51 2.5 YD25DDTi + VW 1.9tdi/1.8t adapter

Adapter that allows you to bolt the Volkswagen PD 1.9tdi/1.8t/07K engine to your:

• Navara D40 2,5 YD25DDTi gearbox
• Np300 (navara pick up) 2,5 YD25DDTi gearbox
• Pathfinder r51 2,5 YD25DDTi

Clutch:

• The single-mass Valeo val835026 clutch kit (or equivalent brands like Ridex, Sachs, etc., which are aftermarket conversion kits for dual-mass flywheels),  a navara 240mm clutch disc (you can use terrano 1 or patrol 240mm clutch plate) in the middle and the 068911024H Audi/VW starter. The starter housing must be shortened by 10 mm, (look in vw tips section) and a 10 mm spacer must be installed between the crankshaft and the flywheel due to the adapter plate thickness.

• Adapter is also compatible with 228mm VALEO 835041, ADV183076 single mass flywheel  kit and VW/Audi 03G911023A starter, custom navara 228mm clutch disc. This flywheel and starter are direct bolt on adapter plate and vw crankshaft.

•  Wanna go with VAl837041 dual mass flywheel kit? Contact us at info@jncswap.com.  For this kit, the adapter must be upgraded.

The adapter includes holes for all four alignment pins to fit the VW engine and the nissan gearbox precisely.

The adapter is compatible with the following engines:

• VE pump 1.9tdi: 1Z, AHU, AGR, AHH, ALE, ALH, AFN, AHF, ASV, AVB, AVG (These engines can be rebuilt into fully mechanical "MTDI" engines.) etc..
• PD (pumpe duse) 1.9tdi: BSU, BRU, BXF, BXJ, ANU, ATD, AXR, BEW, BMT, AVB, AVQ, BSW, BJB, BKC, BLS, BSV, BXE, BPZ, AJM, ATJ, AUY, BVK, AWX, ASZ, AVF, BLT, ARL, BTB, BPX, BUK, etc..
• 1.8t: BEA, AWT, ARX, ARZ, AWC, BJX ,BAM, APX, AMK, BVR, AJQ, AJL, APP, BBU, APY, AUQ, BEX, AYP, AVJ, ADR, AMB, AMU, APT, APU, ARG, ATC, ATW, AWM, AWP, 1.8i non turbo engines, etc...

Package includes: Adapter & 5 screws.