Grand Vitara 2 1.9 DDis + VW 1.9 TDI/1.8T Swap Adapter

Swap adapter for connecting VW 1.9 TDI/1.8T engines to Suzuki Grand Vitara gen. 2 1.9 Ddis 180K20 4x4 gearbox from years 2005-2016.

The engine-to-gearbox angle is 16 degrees, as is standard in the VW Group; the starter remains in its original VW position next to the engine block.

Adapter includes all 4 holes for dowel pins.

3D scan accuracy: 0.02mm scan vs real gearbox.

The adapter is compatible with:

1. 228mm VALEO 835041, ADV183076 single mass flywheel kit or VAl837041 dual mass flywheel kit and VW/Audi 03G911023A starter, &  vitara clutch disc in the middle.

2.  The 240mm single-mass  Valeo val835026 clutch kit (or equivalent brands like Ridex, Sachs, etc., which are aftermarket conversion kits for dual-mass flywheels) can be used with a vitara clutch disc and the 068911024H Audi/VW starter. 

3. You can also use the 240mm dual-mass flywheel that comes with your VW engine. Note: The flywheel must have startermotor gear teeth on the engine block side. Tip: For this setup, you can use the Sachs 2294 002 198 flywheel with a modified vitara friction disc, a VW pressure plate and the 068911024H starter.

The adapter is compatible with the following engines:

The distance between your 1.9 TDI/1.8t dowel pins is 306 mm, measured center to center.

• VE pump 1.9tdi: 1Z, AHU, AGR, AHH, ALE, ALH, AFN, AHF, ASV, AVB, AVG (These engines can be rebuilt into fully mechanical "MTDI" engines.) etc...
• PD (pumpe duse) 1.9tdi: BSU, BRU, BXF, BXJ, ANU, ATD, AXR, BEW, BMT, AVB, DAVQ, BSW, BJB, BKC, BLS, BSV, BXE, BPZ, AJM, ATJ, AUY, BVK, AWX, ASZ, AVF, BLT, ARL, BTB, BPX, BUK , etc...
• 1.8t: BEA, AWT, ARX, ARZ, AWC, BJX ,BAM, APX, AMK, BVR, AJQ, AJL, APP, BBU, APY, AUQ, BEX, AYP, AVJ, ADR, AMB, AMU, APT, APU, ARG, ATC, ATW, AWM, AWP, 1.8i non turbo engines, etc...

---CLICK HERE FOR Tips and Photos---

Package includes: Adapter and 5 cone head screws.

Shipping calculated at checkout.