Td27, Bd30, Qd32 gearboxes + VW 1.9tdi, 1.8t Adapter

Swap adapter for connecting VW 1.9 TDI/1.8T engines to following nissan gearboxes:

• Terrano 1 td27 73kw
• Terrano 2 td27 96kw
• Navara d22 td25 (nissan engine TD series)
• Patrol k260, k160 TD27
• Elgrand td27, qd32
• Trade bd30
• Cabstar td27, bd30
• Atleon Bd30, td27, qd32
• Pathfinder r50 qd32
• Pathfinder wd21 td27
• Double cab d21 td25 non turbo
• King cab d21 td25 non turbo 
• Navara d22 td25 73kw gearbox

Note: The adapter-to-engine angle is 4 degrees. The VW starter has been slightly moved higher so that it fits neatly into the Nissan gearbox bellhousing, eliminating the need for extensive nissan bellhousing cutting. The adapter-to-gearbox angle, or starter position can be adjusted upon request, free of charge. Feel free to contact us via  info@jncswap.com.

The adapter is compatible with:

1. 228mm VALEO 835041, ADV183076 single mass flywheel kit or VAl837041 dual mass flywheel kit and VW/Audi 03G911023A starter,  a Nissan clutch disc in the middle, or change the middle splines on the VW clutch to the Nissan center splines.

2.  The single-mass  Valeo val835026 clutch kit (or equivalent brands like Ridex, Sachs, etc., which are aftermarket conversion kits for dual-mass flywheels) can be used with a nissan clutch disc and the 068911024H Audi/VW starter. 10mm thick spacer between the crankshaft and the vw flywheel, starter housing modified by cutting 10mm as mentioned and shown on the VW tips and tricks page.

3.  Vw/audi 03G911023A  starter and Vw/audi 026105269L One mass flywheel, nissan clutch disc, vw/audi 053 141 117 228mm pressure plate, or redrill the flywheel for the VW LT td28 van 240mm pressure plate for higher power.

4. You can also use the 240mm dual-mass flywheel that comes with your VW engine. Note: The flywheel must have startermotor gear teeth on the engine block side. Tip: For this setup, you can use the Sachs 2294 002 198 flywheel with a modified nissan friction disc, a VW pressure plate and the 068911024H starter.

The adapter is compatible with the following engines:

The distance between the vw engine centralisation pins is 306 mm.

• VE pump 1.9tdi: 1Z, AHU, AGR, AHH, ALE, ALH, AFN, AHF, ASV, AVB, AVG (These engines can be rebuilt into fully mechanical "MTDI" engines.) etc...
• PD (pumpe duse) 1.9tdi: BSU, BRU, BXF, BXJ, ANU, ATD, AXR, BEW, BMT, AVB, AVQ, BSW, BJB, BKC, BLS, BSV, BXE, BPZ, AJM, ATJ, AUY, BVK, AWX, ASZ, AVF, BLT, ARL, BTB, BPX, BUK, etc..
• 1.8t: BEA, AWT, ARX, ARZ, AWC, BJX ,BAM, APX, AMK, BVR, AJQ, AJL, APP, BBU, APY, AUQ, BEX, AYP, AVJ, ADR, AMB, AMU, APT, APU, ARG, ATC, ATW, AWM, AWP, 1.8i non turbo engines, etc...

The package includes an adapter plate and 5 conical-head screws.

The adapter has all 4 holes for the dowel pins.