Jeep KJ Liberty 2.5 2.8 Crd + VW 1.9 tdi, 1.8t Adapter

Adapter that allows you to bolt the Volkswagen PD 1,9tdi/1,8t/07k engine to your Jeep KJ liberty transmission bellhousing.

• cherokee III KJ 2001-2008 143hp/105kw 2.5 crd p52104820ae
• dodge nitro 6 speed 2.8crdi by3416700130, p52104704ae
• 2.8 CRD 2776ccm 150hp/110kw 2002/11-2008/01 p52104820ae (Double-check if you have the same bellhousing as shown in the picture.)

Clutches compability:

The gearbox shaft goes into the VW engine crankshaft, as usual, a pilot bushing or bearing is used.

Adapter is compatible with 228mm VALEO 835041, ADV183076 single mass flywheel kit or VAl837041 dual mass flywheel kit and VW/Audi 03G911023A starter, custom jeep 228mm clutch disc.

The single-mass Valeo val835026 clutch kit (or equivalent brands like Ridex, Sachs, etc., which are aftermarket conversion kits for dual-mass flywheels) can be used with a modified Jeep clutch disc and the 068911024H Audi/VW starter.

You can also use the 240mm dual-mass flywheel that comes with your VW engine. Note: The flywheel must have startermotor gear teeth on the engine block side. Tip: For this setup, you can use the Sachs 2294 002 198 flywheel with a modified Jeep friction disc, a VW pressure plate and the 068911024H starter.

The adapter is compatible with the VW/Audi 03G911023A starter and the VW/Audi 026105269L single mass flywheel, along with a modified Jeep friction plate (240mm outer diameter, 155mm inner diameter, and 8mm friction material thickness). The flywheel needs to be redrilled to fit the VW LT van 3082 634 022 240mm pressure plate. For extreme power applications, you can use the Sachs extreme pressure plate 883082 999707, which shares the same bolt pattern as the VW LT van pressure plate. 

The adapter is compatible with the following engines:

• VE pump 1.9tdi: 1Z, AHU, AGR, AHH, ALE, ALH, AFN, AHF, ASV, AVB, AVG (These engines can be rebuilt into fully mechanical "MTDI" engines.)
• PD (pumpe duse) 1.9tdi: BSU, BRU, BXF, BXJ, ANU, ATD, AXR, BEW, BMT, AVB, AVQ, BSW, BJB, BKC, BLS, BSV, BXE, BPZ, AJM, ATJ, AUY, BVK, AWX, ASZ, AVF, BLT, ARL, BTB, BPX, BUK 
• 1.8t: BEA, AWT, ARX, ARZ, AWC, BJX ,BAM, APX, AMK, BVR, AJQ, AJL, APP, BBU, APY, AUQ, BEX, AYP, AVJ, ADR, AMB, AMU, APT, APU, ARG, ATC, ATW, AWM, AWP, 1.8i non turbo engines,

The adapter plate has holes for all 4 dowel pins. Scan accuracy: 0.02 mm. 

Package includes: Adapter and 5 cone head screws.

---CLICK HERE FOR Tips and Photos---